Description: VT-2000 Hand Fletching Adhesive (0.7 oz bottle) is the next generation of VaneTec’s acclaimed VT-1000 adhesive. It’s superior to any other product tested and brings an impressive list of benefits including:
•Rapid fixture time that allows etching into vane surface
•Product freshness* that guarantees quick drying time to prevent vane curling
•Rapid drying in cool temperature
•Rapid drying in low humidity
•Works on difficult surfaces, including glossy shafts
•Perfect viscosity for applying a small bead; product goes twice as far
•Sensible bottle design with fine cone tip and soft squeeze application
*VT-2000 is always sold fresh.
Instructions: Prep arrows by washing in a (50%) solution of Simple Green® and warm water. Soak shafts for 5-10 minutes, rinse with warm water and air dry, completely. Apply thin bead of VT-2000 and compress firmly using a well aligned jig for 5-8 seconds. Gently remove clamp and let cure overnight for best results. If ends of vane lift after removing clamp apply more pressure.
Tips: Warm all arrow fletching components to room temperature before fletching (68°F or warmer). Glossy shafts need scuffed or sanded before soaking in a Simple Green® solution. Do not use solvents!